- Pinout
- Footprint
TRINAMIC TMC5072-LA-T
| Manufacturer | |
| MPN | TMC5072-LA-T |
| LCSC Part # | C915799 |
| Packaging | QFN-48-EP(7x7) |
| Customer # | |
| Key Attributes | Dual controller/driver for up to two 2-phase bipolar stepper motors |
| Datasheet |  TRINAMIC TMC5072-LA-T |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | TRINAMIC | |
| Packaging | QFN-48-EP(7x7) | |
| Number of H-bridges | 2 | |
| Drive Type | Bipolar Driver | |
| Features | Motor step-out prevention function;Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Under-voltage lockout;Power-on reset;Built-in charge pump | |
| Technology | - | |
| Operating temperature | -40℃~+125℃ | |
| Output Current | 1.1A | |
| Step Resolution | 256 | |
| Control Voltage | 3V~5.5V | |
| RDS(on) | - | |
| Motor Drive Voltage(Vm) | 4.75V~26V | |
| Interface | SPI;UART;STEP/DIR |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 2000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The TMC5072 is a dual high performance stepper motor controller and driver IC with serial communication interfaces. It combines flexible ramp generators for automatic target positioning with industries’ most advanced stepper motor drivers. Based on TRINAMICs sophisticated stealthChop chopper, the driver ensures absolutely noiseless operation combined with maximum efficiency and best motor torque. High integration, high energy efficiency and a small form factor enable miniaturized and scalable systems for cost effective solutions. The complete solution reduces learning curve to a minimum while giving best performance in class.
Features
- Two 2-phase stepper motors
- Drive Capability up to 2×1.1A coil current (2×1.5A peak)
- Parallel Option for one motor at 2.2A (3A peak)
- Motion Controller with sixPoint™ ramp
- Voltage Range 4.75… 26V DC
- SPI & Single Wire UART
- Dual Encoder Interface and 2x Ref.-Switch input per axis
- Highest Resolution up to 256 microsteps per full step
- stealthChop™ for extremely quiet operation and smooth motion
- spreadCycle™ highly dynamic motor control chopper
- dcStep™ load dependent speed control
- stallGuard2™ high precision sensorless motor load detection
- coolStep™ current control for energy savings up to 75%
- Passive Braking and freewheeling mode
- Full Protection & Diagnostics
- Compact Size 7×7mm² QFN48 package
Applications
- CCTV, Security
- Office Automation
- Antenna Positioning
- Heliostat Controller
- Battery powered applications
- ATM, Cash recycler, POS
- Lab Automation
- Liquid Handling
- Medical
- Printer and Scanner
- Pumps and Valves
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 19.0644 | $ 19.06 |
| 10+ | $ 18.193 | $ 181.93 |
| 30+ | $ 16.6824 | $ 500.47 |
| 100+ | $ 15.3648 | $ 1536.48 |
Standard Packaging2000/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | TRINAMIC | |
| Packaging | QFN-48-EP(7x7) | |
| Number of H-bridges | 2 | |
| Drive Type | Bipolar Driver | |
| Features | Motor step-out prevention function;Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Under-voltage lockout;Power-on reset;Built-in charge pump | |
| Technology | - | |
| Operating temperature | -40℃~+125℃ | |
| Output Current | 1.1A | |
| Step Resolution | 256 | |
| Control Voltage | 3V~5.5V | |
| RDS(on) | - | |
| Motor Drive Voltage(Vm) | 4.75V~26V | |
| Interface | SPI;UART;STEP/DIR |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 2000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The TMC5072 is a dual high performance stepper motor controller and driver IC with serial communication interfaces. It combines flexible ramp generators for automatic target positioning with industries’ most advanced stepper motor drivers. Based on TRINAMICs sophisticated stealthChop chopper, the driver ensures absolutely noiseless operation combined with maximum efficiency and best motor torque. High integration, high energy efficiency and a small form factor enable miniaturized and scalable systems for cost effective solutions. The complete solution reduces learning curve to a minimum while giving best performance in class.
Features
- Two 2-phase stepper motors
- Drive Capability up to 2×1.1A coil current (2×1.5A peak)
- Parallel Option for one motor at 2.2A (3A peak)
- Motion Controller with sixPoint™ ramp
- Voltage Range 4.75… 26V DC
- SPI & Single Wire UART
- Dual Encoder Interface and 2x Ref.-Switch input per axis
- Highest Resolution up to 256 microsteps per full step
- stealthChop™ for extremely quiet operation and smooth motion
- spreadCycle™ highly dynamic motor control chopper
- dcStep™ load dependent speed control
- stallGuard2™ high precision sensorless motor load detection
- coolStep™ current control for energy savings up to 75%
- Passive Braking and freewheeling mode
- Full Protection & Diagnostics
- Compact Size 7×7mm² QFN48 package
Applications
- CCTV, Security
- Office Automation
- Antenna Positioning
- Heliostat Controller
- Battery powered applications
- ATM, Cash recycler, POS
- Lab Automation
- Liquid Handling
- Medical
- Printer and Scanner
- Pumps and Valves
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |