- Pinout Diagram
- Footprint Diagram
HGSEMI L293DDM
| Manufacturer | HGSEMIAsian Brands |
| MPN | L293DDM |
| LCSC Part # | C434591 |
| Packaging | SOP-20-300mil |
| Customer # | |
| Key Attributes | PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES |
| Datasheet |  HGSEMI L293DDM |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | HGSEMI | |
| Packaging | SOP-20-300mil | |
| Drive Type | - | |
| Number of H-bridges | - | |
| Features | Over temperature protection | |
| Technology | - | |
| Operating temperature | -40℃~+150℃ | |
| Step Resolution | - | |
| Output Current | 600mA | |
| Control Voltage | 4.5V~36V | |
| RDS(on) | - | |
| Interface | - | |
| Motor Drive Voltage(Vm) | - |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 36 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz
Features
- 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL
- 1.2A PEAK OUTPUT CURRENT (non repetitive) PER CHANNEL
- ENABLE FACILITY
- OVER TEMPERATURE PROTECTION
- LOGICAL "O" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
- INTERNAL CLAMP DIODE
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | HGSEMI | |
| Packaging | SOP-20-300mil | |
| Drive Type | - | |
| Number of H-bridges | - | |
| Features | Over temperature protection | |
| Technology | - | |
| Operating temperature | -40℃~+150℃ | |
| Step Resolution | - | |
| Output Current | 600mA | |
| Control Voltage | 4.5V~36V | |
| RDS(on) | - | |
| Interface | - | |
| Motor Drive Voltage(Vm) | - |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 36 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz
Features
- 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL
- 1.2A PEAK OUTPUT CURRENT (non repetitive) PER CHANNEL
- ENABLE FACILITY
- OVER TEMPERATURE PROTECTION
- LOGICAL "O" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
- INTERNAL CLAMP DIODE
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |