TI MSP430F5327IPNR

The MSP430 family of ultralow-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in 3.5 μs (typical). The MSP430F5329, MSP430F5327, and MSP430F5325 are microcontroller configurations with an integrated 3.3-V LDO, four 16-bit timers, a high-performance 12-bit analog-to-digital converter (ADC), two universal serial communication interfaces (USCI), hardware multiplier, DMA, real-time clock module with alarm capabilities, and 63 I/O pins. The MSP430F5328, MSP430F5326, and MSP430F5324 include all of these peripherals but have 47 I/O pins. Typical applications include analog and digital sensor systems, data loggers, and various general-purpose applications.

• Low Supply Voltage Range: 3.6 V Down to 1.8 V
• Ultralow Power Consumption
  • Active Mode (AM): All System Clocks Active 290 μA/MHz at 8 MHz, 3 V, Flash Program Execution (Typical) 150 μA/MHz at 8 MHz, 3 V, RAM Program Execution (Typical)
  • Standby Mode (LPM3): Real-Time Clock With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up: 1.9 μA at 2.2 V, 2.1 μA at 3 V (Typical)
  • Low-Power Oscillator (VLO), General Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up: 1.4 μA at 3 V (Typical)
  • Off Mode (LPM4): Full RAM Retention, Supply Supervisor Operational, Fast Wake-Up: 1.1 μA at 3 V (Typical)
  • Shutdown Mode (LPM4.5): 0.18 μA at 3 V (Typical)
• Wake-Up From Standby Mode in 3.5 μs (Typical)
• 16-Bit RISC Architecture, Extended Memory, Up to 25-MHz System Clock
• Flexible Power Management System
• Fully Integrated LDO With Programmable Regulated Core Supply Voltage
• Supply Voltage Supervision, Monitoring, and Brownout
• Unified Clock System
  • FLL Control Loop for Frequency Stabilization
  • Low-Power Low-Frequency Internal Clock Source (VLO)
  • Low-Frequency Trimmed Internal Reference Source (REFO)
  • 32-kHz Watch Crystals (XT1)
  • High-Frequency Crystals Up to 32 MHz (XT2)
• 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TA2, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
• Two Universal Serial Communication Interfaces
  • USCI_A0 and USCI_A1 Each Support:
    • Enhanced UART Supports AutoBaudrate Detection
    • IrDA Encoder and Decoder
    • Synchronous SPI
  • USCI_B0 and USCI_B1 Each Support:
    • I2C
    • Synchronous SPI
• Integrated 3.3-V Power System
• 12-Bit Analog-to-Digital (A/D) Converter With Internal Reference, Sample-and-Hold, and Autoscan Feature
• Comparator
• Hardware Multiplier Supporting 32-Bit Operations
• Serial Onboard Programming, No External Programming Voltage Needed
• Three Channel Internal DMA
• Basic Timer With Real-Time Clock Feature

• Analog and digital sensor systems
• Data loggers
• Various general-purpose applications